Introduction to the use of large tire changer

How to use large tire changer:

I. Control method

1. Press the second foot pedal on the left and release it when you hear the sound of "click". At this time, the supporting claws do not move; repeat once, the supporting claws move inward; repeat again, the supporting claws move outward and recover To the initial position. 2. Pull off the detachable arm of the rim, step on the second foot pedal on the right side and keep stepping on it. The large cylinder drives the wheel-level detachable arm to move inward and incompetently. Rims isolated. Loosen the foot pedal, and the big cylinder returns to the initial position. 3. Press down the first foot pedal, and the table rotates clockwise; otherwise, lift the foot pedal upward, and the table rotates counterclockwise. 4. Move the locking handle downwards to release the vertical and horizontal axes at the same time; otherwise, push the locking handle upwards to lock the vertical and horizontal axes at the same time.

2, tire disassembly and assembly method

1. Clean the air of the tire to be disassembled. 2. Press the tire detachment sheet to separate the tire from the steel rim. 3. Place the tire on the workbench for support (or clamping), adjust the price of the tire picking machine and lock it after adjusting the position between the disassembly head and the tire. 4. Apply lubricant to the edges of tires and steel rims. 5. Use a crowbar to pry the edge of the tire onto the disassembly head, without pulling out the crowbar. At this time, rotate the table clockwise to remove the tire. Use the same method to remove the tire on the other side. 6. When installing the tire, press the edge of the tire with the disassembly head, and turn the table clockwise to complete (still apply lubricant). Use the same method to install the tire on the other side. 7. When inflating the tire, the inflation pressure can be read from the inflation meter.