Yingkou Jinhua Machinery Manufacture Co.,Ltd.
Contact: Ms. Lu
Postcode: 115000
Phone: 0417-2611139
Fax: 0417-2639111
Email: ykjinhua@hotmail.com
Sales Hotline: 18841716688
Website: www.jkdmusic.com/en
Address: 114#west,third floor,zhanqian district,yingkou city,liaoning provine
Points for replacing auto maintenance parts
First, try to use sealant, if necessary, use paint instead to achieve the ideal sealing effect;
Second, the appearance quality of rubber seals should be carefully checked before assembly; use special tools to press-fit to avoid knocking deformation;
Fourth, the assembly is carried out under extremely clean conditions, and the working surface of the part is free of bumps, scratches, burrs and other attachments;
Fifth, strict operating procedures, seals should be installed correctly to prevent deformation when not in place;
Sixth, master the performance specifications and use requirements of seals, and replace failed parts in a timely manner;
Seventh, for thin-walled parts such as side covers, sheet metal cold is used for correction; shaft hole parts that are easy to wear can be processed by metal spraying, welding repair, gluing, machining, etc. to reach the original size;
Eighth, the nut should be repaired or replaced with a broken or loose wire, and screwed to the specified torque.
Auto Maintenance Parts was selected Yingkou Jinhua Machinery Co., Ltd.
Third, fill the grease according to regulations, clean and clear the vent holes and check valves regularly;
Fourth, the assembly is carried out under extremely clean conditions, and the working surface of the part is free of bumps, scratches, burrs and other attachments;
Fifth, strict operating procedures, seals should be installed correctly to prevent deformation when not in place;
Sixth, master the performance specifications and use requirements of seals, and replace failed parts in a timely manner;
Seventh, for thin-walled parts such as side covers, sheet metal cold is used for correction; shaft hole parts that are easy to wear can be processed by metal spraying, welding repair, gluing, machining, etc. to reach the original size;
Eighth, the nut should be repaired or replaced with a broken or loose wire, and screwed to the specified torque.
Auto Maintenance Parts was selected Yingkou Jinhua Machinery Co., Ltd.
